Zoom 5352 Quick Start Manual page 3

2
Connect the supplied Ethernet cable between any cable modem LAN jack and a computer's
Ethernet jack. We recommend that you do this even if you later plan to disconnect this computer.
If connecting the Ethernet cable to a computer is difficult or impossible, you can make a wireless
connection as discussed below in "Connecting Model 5352 wirelessly to some device."
3
Connect the Zoom power cube between the Zoom cable modem and a live power jack. Make
sure the cable modem's Power Switch is ON.
4
What you do next depends on your cable modem company. Typically you can call your cable
modem company's support department and tell them your cable modem is hooked up. They'll
normally ask for the information mentioned above in "Before installing your cable modem
please read this." Some cable companies also let you just open the browser on a computer
that's connected to the Zoom cable modem. A setup page comes up automatically, and you
follow the instructions.
5
Go to "Now that your cable modem is connected, do this." below.
Now that your cable modem is connected, do this.
When your cable modem first connects to your cable service provider, allow 5 to 30 minutes for the cable
modem to connect to the network. The cable modem uses this time to locate and connect to the
appropriate channels for communication. You'll see the DS (downstream), US (upstream), and Online
modem lights flashing until the Online light stays steady green to signal success. (Blue US/DS LEDs
indicate channel bonding.)
To check that your cable modem is working, open your browser and go to a familiar Web site. If it
works, congratulations! Installation is complete for a single PC. For Internet access using a
smartphone, tablet, or other wireless device, see "Connecting Model 5352 wirelessly to some
device."
If you want to connect additional computers or other devices using the modem/router's Ethernet/LAN
ports, please see "Read This Only if You Are Connecting additional computers and/or other
devices to Model 5352's Ethernet/LAN ports."
In the unlikely event that you want to configure advanced options, please refer to the User Manual on
our website at www.zoomtel.com/5352manual
Please note the following:
•
Do not block Model 5352's vents in any way.
•
Model 5352 can be horizontal or vertical. To put the cable modem/router in a vertical orientation,
use the swiveling "foot" at the bottom of the unit.