Zoom 5352 Quick Start Manual page 5

Cable Modem Bottom Label:
3
When your Model 5352's Online light is solid green as discussed above, open your device's browser
and go to a website to test your wireless setup. If it works, congratulations! If it doesn't, please see
the Troubleshooting Tips in the User Manual.
Note: In the unlikely event that you want to change the unique SSID or the Security Key, please refer to
the User Manual on our website at www.zoomtel.com/5352manual
Read this only if you are connecting additional computers and/or other devices to
the cable modem/router's Ethernet/LAN ports
You can plug up to four computers, game consoles, or other Ethernet-capable devices into the cable modem's LAN
ports. For information about your specific device, please refer to the documentation that came with that
device. Follow the instructions on the other side of this Quick Start for each computer or other device.
1
If you connected the cable modem to a computer using a wired connection when setting up the cable
modem, unplug the computer now if you don't want it to stay connected to the cable modem.
2
To connect a computer or other Ethernet-capable device, plug one end of an Ethernet cable into any
available Ethernet (LAN 1, 2, 3, or 4) port on the cable modem and plug the other end of the Ethernet
cable into the Ethernet port of the additional device you want to connect to the cable modem. (If you
are connecting a hub or a switch, this is typically called an Uplink or Expansion port.) If you are
connecting a computer or game station, go to step 5 of this section.
3
If you are connecting a network device such as a switching hub, use the instructions that came with
that device. Then reboot any computer that is part of your network. For example, if you connected a
switching hub, reboot any computer that will make a wireless connection to that switching hub.
4
If you are connecting a HomePlug adapter pair with one adapter plugged into the cable modem and
an AC outlet, and the other adapter plugged into a computer or game station and an AC outlet, make
those connections and then go to step 5.
5
Verify that your Internet connection is working. Open a Web browser on each computer that's using
your network and try to connect to a familiar Web address.
Note: If at any time you need to make changes to the cable modem's configuration, open a web
browser from any PC on your cable modem's network and type http://192.168.0.1 to open the Zoom
Configuration Manager. Alternately, you can connect a computer directly to the cable modem, open
its browser, and then type http://192.168.0.1.
Congratulations! You have connected an additional device to the Internet. You can connect up to 4
Ethernet-capable devices to the cable modem/router, following the instructions above for each device and
starting at step 2 of this section. You can also connect wireless devices as discussed above.