Rear Panel - Inter-m AFD-6218 Operation Manual

Rear Panel

Rear Panel
1 2
1. FROM AMP tERMInAL
It is the terminal connecting to outputs of each amp.
Amp status will be checked through signals coming to this terminal.
2. tO AMP tERMInAL
It is the terminal connecting to inputs of each amp.
It delivers the signal received from free amp to each amp input.
3. AUDIO InPUt tERMInAL
It is the terminal connecting to output of free amp.
4. BACK-UP In/OUt tERMInAL
It is the terminal connecting the spare amp which is used in case of emergency.
Input of spare amp is connected to Back-Up In terminal, and output to Back-Up Out. This spare amp should
have same or equivalent output of amp used.
5. ADDRESS SWItCh
It is the switch which sets up the role of each system if device is expanded and interlocked.
For details of equipment setting, please refer to page 4
6. AMP SEt SWItCh
It is the switch used when selecting the use of each channel. (CH1~CH8 = PIN1~PIN8)
Turn off the switch for the channel which will not be used.
3 4 5
AMP FAULT DETECTOR
6 7 8 9
10 11 12
AFD-6218
7