Related Manuals for Inter-m A-500
Summary of Contents for Inter-m A-500
-
Page 1: Operation Manual
Operation Manual Modular Digital Amplifier A-500 * Rack mount products in the Western Hemisphere(North America, South America, and the Caribbean) do not have handles installed due to customer preference. - Page 2 A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
-
Page 3: Table Of Contents
MODULAR DIGITAL AMPLIFIER Contents Contents Unpacking ............................2 Installation Environment............................2 Important Safety Instructions......................2 Features ............................3 Front Panel ............................4 Rear Panel ............................6 Applications ............................8 Block Diagram ..........................9 Specifications ..........................10 Service Procedures............................11 Schematic .............................11 Parts List ............................11 Variations and Options .......................11 Warranty ............................11 A-500... -
Page 4: Unpacking
MODULAR DIGITAL AMPLIFIER Unpacking Unpacking Although your A-500 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation. -
Page 5: Features
- Monitoring function (use of headphone) - Signal LED and protective LED - Built-in of various protective function (OCP, OTW, OVP, UVP) - Adoption of stable SMPS (switching mode power supply) - Operation of DC 24V battery power during emergency A-500... -
Page 6: Front Panel
6. SIGNAL LED DISPLAY This is a signal LED to display signal level input from Z-500. The green lamp turns on when signal level input is about more than -30dBv. LED of #1~#7channel operates depending on signal level. A-500... - Page 7 The red LED turns on when the spare AMP operates. The red LED turns on to display that the spare AMP operates after signal is automatically converted to spare AMP when the self-temperature detection circuit and the over-current protection circuit of 7-ch of AMP operate for any reason, A-500...
-
Page 8: Rear Panel
This is a connector where 7-ch analog signals are input from Z-500. Use 25P 600mm cables provided as accessories to the set during connection. 13 12 11 10 9 25 24 23 22 21 20 19 18 17 16 15 14 A-500... - Page 9 Connect output contactor appropriate for channel before use by referring to printing specifications. Use 2pcs of 9P terminal blocks provided as accessories of the set during connection of speaker wires. A small (-) driver with diameter of about 3mm is required. A-500...
-
Page 10: Applications
MODULAR DIGITAL AMPLIFIER Applications Applications A-500... -
Page 11: Block Diagram
MODULAR DIGITAL AMPLIFIER Block Diagram Block Diagram input Balanced INPUT SIGNAL ANALOG A-500... -
Page 12: Specifications
MODULAR DIGITAL AMPLIFIER Specifications Specifications A-500 Output channel 7channel + 1channel(spare channel) Rated Output(at THD 1%) 30W/channel (Total : 210W) Input sensitivity 0dBV Balanced Signal to Noise More 80dB Total Harmonic Distribution(THD) Under 0.1% ( AES_17 Filter) Frequency Response 100Hz~20kHz( 3dB) at 36V Power source AC 100-120V or 220-240V, 50/60Hz ;... -
Page 13: Service
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region. - Page 14 NOTE...
- Page 15 NOTE...
- Page 16 Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).