Page 1
Operation anual MP Fault Detector FD-6218 *Rack mount products in the Western Hemisphere (North America, South America, and the Caribbean) do not have handles installed due to customer preference.
Page 2
A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
AMP FAULT DETECTOR Unpacking Unpacking Although your AFD-6218 is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation.
Display the status of amp connected to each channel by LED - Automatic Change Channel which fault occurs when checking out the amp will be switched to spare amp automatically. - Check time setup You can set up 5 different time intervals for automatic self check. AFD-6218...
2) Set the termination switch to LOAD only for the first and last-numbered equipment units. All others must be set to OPEN. Equipment 1 Equipment 2 Equipment 3 Equipment 4 S/W : LOAD S/W : OPEN S/W : OPEN S/W : LOAD ※CAUTION : Communication error may occur if setting is performed incorrectly. AFD-6218...
If two or more channels are fault, channel which has higher priority will be replaced with spare amp. 5. Check automatically according to checking times which has been set manually. 6. It will be automatically switched to normal amp if Test button of the channel is pushed after fault amp is restored to its original status. AFD-6218...
When this button is pressed in a short time, buzzer will be off. When this button is pressed in a long time, fault will be check (All channel). 6. POWER LED It will be on if power is supplied. AFD-6218...
For details of equipment setting, please refer to page 4 6. AMP SEt SWItCh It is the switch used when selecting the use of each channel. (CH1~CH8 = PIN1~PIN8) Turn off the switch for the channel which will not be used. AFD-6218...
Page 10
※ Same for all IN/OUT terminals. 10. SPEAKER OUtPUt tERMInAL It is the terminal which outputs of each amp will be output through AFD-6218. 11. tERMInAtIOn SWItCh (LOAD/OPEn) It is the switch which is set for stable data receiving/transmitting of link in/out.
Applications Applications RM-6024/6012KP TP-6231 RME-6108 ECS-6216P LINE TO PC PRI. MUTE INPUT OUTPUT LEVEL POWER INPUT ER-6116 DIB-6000 SC-6224 SPEAKER PP-6213 AFD-6218 POWER AMP POWER AMP (SPARE) PD-6359 PB-6207 DC LINE AC LINE COMMUNICATION SIGNAL LINE BATTERY (DC 24V) AFD-6218...
To obtain specific warranty information and available service locations, contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
Page 16
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).