How To Use; Lamp Change - Smeg PUM60X Instruction Manual

Lamp Change

As with any maintenance on the appliance, first turn off the
power supply by unplugging from the wall socket.
1.Remove the filters from the appliance.
2.Unload the screws on the stainless steel hood panel.
3.Remove the stainless steel panel before changing the lamp
(see pic 7).
4.Change the lamp (LED Lamp Max.2W) and then reinstall
in the reverse manner.
pic 7

How To Use

3 Speed 3 Speed adjustment ( ( see adjustment adjustment see see pic 6). pic 6).
Push Stop button, and the motor will stop.
◆
Push the Low button, and the motor runs at low
◆
speed.
Push the Mid button, and the motor runs at mid. speed.
◆
Push the High button, and the motor runs at high
◆
speed.
Push the Light button, and the two lighting lamps illu-
◆
minate. Push it again and the lamp will turn off.
On any speed, push "T" & the delay timer will switch
◆
off the hood after 5 minutes.
pic 6