Restoring The Factory Settings - Vox DelayLab Owner's Manual

VOX DelayLab Owner's manual
2 . Vintage: Reverse Analog Delay
This setting applies modulation to the forward delay and
produces a feeling of floating. To obtain the modulation
effect, adjust the FWD/RVS balance and feedback.
3 . Custom: Reverse Filter Delay
This setting is a reverse delay with a filter.
The center frequency of the filter moves synchronizing to
the delay time, which gives a unique sound.
Effect Type: LOOPER
With this effect you can apply a delay to a loop input.
1 . Standard: Digital Delay
This setting is a delay that can set a delay time setting
separately for the left and right. You can easily produce
loops that have a stereo feeling.
2 . Vintage: Analog Delay
With this setting you can combine the analog delay and
looper.
3 . Custom: Space Delay
Depending on the parameter settings, you can produce
fantastic tracks when recording only a loop of various
string music and reverberant music. This looper decreases
the volume of the track already recorded and emphasizes
the new overdubbed sound each time overdubbing is
performed.
18

Restoring the factory settings

Here's how to restore the DelayLab to its factory-set state.
This procedure will initialize the programs you've
saved, returning all of them to the factory-set programs.
1.
Press and hold the CANCEL button and SYNC button
and connect a cable to the INPUT (L/MONO) jack.
2.
Press the WRITE button when "Inlt" blinks on the
display. The initialization of the program starts.
When initialization is complete, "CPLt" appears on the
display.
During initialization, do not disconnect the cable
from the INPUT (L/MONO) jack.