Installing Your Pcie Host Expresscard/34 Adapter (For Laptops) - Matrox MXO2 Installation And User Manual

perform the following steps, refer to your Mac desktop computer's
documentation.
Shut down the computer, unplug the power cord and all the cables from the
1
unit, and open the computer's chassis.
Insert the Matrox PCIe host adapter in an available PCIe slot in the
2
computer, and secure the adapter into place.
3 Close the computer chassis, and reconnect the power cord and all the cables
to the unit.
Installing your PCIe host ExpressCard/34
adapter (for laptops)
The Matrox PCIe host ExpressCard/34 adapter is designed to operate in your
MacBook Pro's ExpressCard/34 slot. You can install the Matrox PCIe host
ExpressCard/34 adapter when your MacBook Pro is on or off. Connect the
Matrox PCIe cable to the host ExpressCard/34 adapter, and then insert the host
adapter in your MacBook Pro's ExpressCard/34 slot until the adapter clicks into
place. For details on how to safely remove your Matrox PCIe host
ExpressCard/34 adapter from your MacBook Pro, see
ExpressCard/34 adapter"
Matrox PCIe
ExpressCard/34
PCIe
adapter
cable
²Caution To ensure functionality and avoid damaging the PCIe cable or
host connector, the side labeled "B" on the PCIe cable connector must face
the top of the Matrox PCIe ExpressCard/34 adapter.
on page 10.
ExpressCard/34 slot
Installing your Matrox PCIe adapter
"Removing your PCIe host
9