Check Our Website For Equipment Information; Battery Requirements And Guidelines For Mxo2 - Matrox MXO2 Installation And User Manual

Hide thumbs Also See for MXO2:
Table of Contents

Advertisement

• Boinx Software BoinxTV v1.8.4.
• Softron MovieRecorder v2.4.4, OnTheAir Video v2.5.16, and OnTheAir
Video Express v1.2.2.
• ToolsOnAir Just:In v1.025.
• Avid Media Composer v5.5.3 (MXO2 Mini and MXO2 Mini with MAX
only)
¦ Note For instruction on using Avid Media Composer, download the Using
Matrox MXO2 Mini with Avid Media Composer manual from the Matrox
MXO2 Support section of our website at www.matrox.com/video/support.
• Telestream Wirecast v4.2.
• QuickTime Broadcaster v1.5.3.
• Boris FX Media 100 Suite v2.1.
• For Matrox MAX H.264 encoding:
Apple Compressor v3.5.3 and v4.0.5 (required for Blu-ray Disc).
$
Apple QuickTime Pro v7.6.6, Apple Final Cut Pro v7.0.3, Adobe
$
Premiere Pro v5.5.2, Adobe After Effects v10.5, Adobe Encore v5.1,
Adobe Media Encoder v5.5.1, Telestream Episode v6.3.1, Boris FX
Media 100 Suite v2.1, Apple Motion v4.0.3, Apple Qmaster v3.5.3, Avid
Media Composer v5.5.3 (MXO2 Mini with MAX only), or other
QuickTime-based video applications.

Check our website for equipment information

For up-to-date information about recommended computer systems, batteries, and
other MXO2-compatible devices, check the Matrox MXO2 Support section of
our website at www.matrox.com/video/support.

Battery requirements and guidelines for MXO2

¦ Note This section does not apply to Matrox MXO2 Rack and Matrox MXO2
Mini as they cannot be powered by a battery.
As an alternative to using an AC outlet, you can use a battery to power Matrox
MXO2 or MXO2 LE. To avoid damage to your MXO2 system and peripheral
devices when using a battery, please observe the following requirements and
guidelines. For instructions on how to connect a battery, see
on page
14
or
• Use a standard self-protected (fused) battery with a nominal voltage of 12V,
13.2V, or 14.4V. A higher-voltage battery will damage your MXO2 system.
• Disconnect MXO2 from the battery when not in use. Do not leave MXO2
connected to the battery when not in use as this may damage your MXO2
system and/or battery.
"Powering MXO2 LE"
Battery requirements and guidelines for MXO2
on page 34.
"Powering MXO2"
3

Advertisement

Table of Contents
loading

Table of Contents