Using Matrox Mxo2 Dock; Using The Matrox Mxo2 Thunderbolt Adapter - Matrox MXO2 Installation And User Manual

Using Matrox MXO2 Dock

For instructions on how to connect and use Matrox MXO2 Dock, see
E, "Connecting and Using Matrox MXO2 Dock,"

Using the Matrox MXO2 Thunderbolt adapter

Use the Matrox MXO2 Thunderbolt adapter to connect MXO2 LE to your
computer's Thunderbolt port. When doing this, it may take up to ten seconds for
your MXO2 LE to be detected by your system and its applications.
¡ Important Make sure that the Matrox PCIe cable is connected to the adapter
and MXO2 LE before connecting the adapter to your computer via the
Thunderbolt cable. If you want to disconnect or connect MXO2 LE when your
system is running, you must do it by disconnecting/connecting the Thunderbolt
cable. Do not disconnect the Matrox PCIe cable from the adapter, or MXO2 LE,
when your Mac system is running.
PCIe cable
²Caution To ensure functionality and avoid
damaging the PCIe cable or host connector, you
must connect the PCIe cable as shown in
"Ensuring proper PCIe cable connection"
page 36.
Matrox MXO2
Thunderbolt adapter
Connecting MXO2 LE to your Mac system
on page 177.
MXO2 LE
(side view)
Thunderbolt cable
(Not included. A
Thunderbolt cable is
required to connect the
Matrox MXO2 Thunderbolt
adapter to your computer.)
To your computer's
Thunderbolt port.
37
Appendix
on