Kyocera TASKalfa 265ci Service Manual page 78

Hide thumbs Also See for TASKalfa 265ci:
Table of Contents

Advertisement

Item No.
U411
Scanner Auto Adjustment
Description
Uses a specified original and automatically adjusts the following items in the scanner and the DP
scanning sections.
Scanner section: Original size magnification, leading edge timing, center line, input gamma, input
gamma in monochrome mode and matrix
DP scanning section: Original size magnification, leading edge timing, center line
Purpose
To perform automatic adjustment of various items in the scanner and the DP scanning sections.
Method
1. Press the start key.
2. Select the item.
Display
All
Table
DP
Method: Table
1. Enter the target values which are shown on the specified original (P/N: 302FZ56990) execut-
ing maintenance item U425.
2. Set a specified original (P/N: 302FZ56990) on the platen.
3. Enter maintenance item U411.
4. Select [Table].
5. Press the start key. Auto adjustment starts.
6. When automatic adjustment has normally completed, [OK] is displayed. If a problem occurs
during auto adjustment, [NG XX] (XX is replaced by an error code) is displayed and operation
stops. Should this happen, determine the details of the problem and repeat the procedure
from the beginning.
7. To return to the screen for selecting an item, press the stop key.
Method: DP
1. Select [DP].
2. Set a specified original (P/N: 303LJ57010) in the DP.
3. Press the start key. Auto adjustment starts.
4. When automatic adjustment has normally completed, [OK] is displayed. If a problem occurs
during auto adjustment, [NG XX] (XX is replaced by an error code) is displayed and operation
stops. Should this happen, determine the details of the problem and repeat the procedure
from the beginning.
5. To return to the screen for selecting an item, press the stop key.
Description
Description
Performs automatic adjustment in the DP
scanning section following automatic
adjustment in the scanner section
Automatic adjustment in the scanner sec-
tion
Automatic adjustment in the DP scanning
section:
1-3-40
Original to be used
for adjustment (P/N)
302FZ56990/
303LJ57010
302FZ56990
303LJ57010
2PA

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-c2026mfpFs-c2126mfp

Table of Contents