General; Location Of Controls; Setting The Clock - Sony XR-C2200 Service Manual
Fm/am cassette car stereo
Hide thumbs
Also See for XR-C2200:
- Installation/connections manual (11 pages) ,
- Operating instructions manual (20 pages) ,
- Operating instructions manual (18 pages)
Table of Contents
Advertisement
Location of controls
MENU
SOURCE
SOUND
RELEASE
Refer to the pages listed for details.
1 MENU button 7, 9, 10, 11, 13
2 Volume control dial
3 SOURCE (TUNER/CD/MD) button
9, 10, 12
4 PRST/DISC +/– (cursor up/down) buttons
7, 9, 10, 11, 13
During radio reception:
Preset stations select 10
During CD/MD playback:
Disc change 13
5 DSPL (display mode change) button
8, 12, 13
6 MODE button
During radio reception:
BAND select 9, 10
During CD or MD playback:
CD/MD unit select 12
7 Z (eject) button 8
8 Display window
9 m/M(fast winding)/DIR (tape
transport direction change) buttons 8
0 D-BASS button 12
SECTION 1
DSPL
MODE
-SEEK/AMS
ENTER
REP
SHUF
1
2
3
4
qa SOUND button 11
qs RELEASE (front panel release) button
6, 15
qd SEEK/AMS –/+ (cursor left/right) buttons
7, 9, 10, 11, 13
seek 10
Automatic Music Sensor 13
manual search 13
qf Reset button (located on the front side
of the unit behind the front panel) 6
qg ENTER button 7, 9, 10, 11, 13
qh Number buttons
During radio reception
Preset number select 10
During CD/MD playback:
(1) REP 14
(2) SHUF 14
qj OFF button* 6
* Warning when installing in a car
without ACC (accessory) position on
the ignition key switch
Be sure to press (OFF) on the unit for two
seconds to turn off the clock display after
turning off the engine.
When you press (OFF) momentarily, the
clock display does not turn off and this
causes battery wear.
GENERAL
DIR
D-BASS
OFF
5
6
XR-C2200/XR-C2300X
This section is extracted from
instruction manual.
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then press either side of
(PRST/DISC) repeatedly until "CLOCK"
appears.
1 Press (ENTER).
The hour indication flashes.
2 Press either side of (PRST/DISC) to set
the hour.
3 Press + side of (SEEK/AMS).
The minute indication flashes.
4 Press either side of (PRST/DISC) to set
the minute.
2
Press (ENTER).
The clock starts.
After the clock setting is complete, the
display returns to normal playback mode.
3
Advertisement
Table of Contents
