Table of Contents
Advertisement
PPTP: If your ISP uses PPTP (Point-to-Point Tunneling Protocol), please select PPTP. Next,
enter the PPTP Subnet Mask (e.g., 255.255.255.0), PPTP Local Address (e.g., 10.66.99.88)
and PPTP Remote Address (e.g., 172.66.99.88) provided by your ISP on the web page. And
click Apply.
2
.
2
.
4
A
d
j
u
s
t
i
n
g
L
2
.
2
.
4
A
d
j
u
s
t
i
n
g
L
The LAN connection setup comes with parameters of IP address and Subnet Mask.
1. Go to Network page and choose LAN.
2. For NAT Usage: the local IP address will be translated into a public IP for data transmission.
The default values for the router's local IP address and Subnet Mask are 192.168.1.1 and
255.255.255.0. Keep the default values.
3. Click the tab of DHCP Relay Agent. It will enable the router to serve as a DHCP server for
your network. A DHCP server automatically assigns an IP address and related parameters to
each computer on your network.
A
N
C
o
n
n
e
c
t
i
o
n
A
N
C
o
n
n
e
c
t
i
o
n
13
Vigor3300V+ Series Quick Start Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor3300V+ and is the answer not in the manual?
Questions and answers