Draytek Vigor3300V+ Quick Start Manual page 20

Multi wan security router

Hide thumbs Also See for Vigor3300V+:

Table of Contents

Static IP: If Static IP is selected, the following screen will appear. Please type in values for

IP address, Subnet Mask, Default Gateway and Primary DNS specified by your ISP, and

then click Apply.

DHCP: If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP

address for Vigor3300 automatically. It is not necessary for you to assign any setting. Click

Apply.

PPPoE: If your ISP provides you the PPPoE (Point-to-Point Protocol over Ethernet)

connection, please select PPPoE to get the following page. Enter the username and

password provided by your ISP on the web page. And click Apply.

Vigor3300V+ Series Quick Start Guide

Table of Contents