NORPOLE EW CIM65S User Manual page 14

I nstal l ation Ty pes
This ice maker has been designed for Mobile ( free-standing) installation. It can also be
Enclosed ( as under a cabinet) or Built-in ( sealed to the floor) , although this last option is
not the preferred method of installation. In every case, there must be adequate air space
around the unit for ventilation purposes ( see diagrams on page 8 ) .
Mob il e In stal l ation :
A mobile installation will allow you to install the icemaker free-standing in any place you
desire provided you have access to a water supply and drainage facilities. You must
follow the stated instructions for
a. Electrical requirements
b. Water supply and drain connections
c. Leveling the icemaker.
En cl osed In stal l ation :
An enclosed installation will allow you to install the ice maker under a cabinet, or in a
kitchen cabinet provided the required clearance space around the ice maker is respected.
This installation has the same requirements as a mobile installation.
The unit should be placed in the cabinet by sliding it into the cabinet's opening and then
leveling it properly.
I MPORT ANT : For Mobile and Enclosed installations you must use flexible water and
drain connections to the water supply and drain. T his will allow the moving of the ice
maker for cleaning. Use the water and drain hoses supplied with the unit for these
connections.
Buil t-in In stal l ation :
If this method of installation is chosen, it will still be necessary to allow adequate
ventilation space around the unit. The following additional items must be observed.
1 . P lace the ice maker in front of the installation location. Remove the feet and place
the unit flat on the floor or on a platform depending on your installation requirements.
2 . The water supply line and drain line must be plumbed before connecting to the ice
maker.
3 . Turn on the main water supply and tap. Check for water supply connection leaks.
Tighten any connections ( including connections at the valve) or nuts that leak.
4. P our 1 gallon of water into the ice storage bin to check for leaks at all drain connec-
tions and the nut of the drain water hole. Tighten any connections or nuts that leak.
( This procedure will also indicate if the drainpipe is kinked or pinched.)
13