Rorke Data Galaxy Aurora Series Configuration And System Integration Manual page 98

G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
The second set of 6 charts shows response times:
In this set of graphs, going across, we don't see the actual time as in the first
set of graphs, but divisions of times. Vertically, it is showing the number of
commands executed. Horizontally, it is how long each command took during
that time period. So for example, in the upper right chart, we see four bars:
The left bar shows that there were about 39000 commands executed which
took 100 microseconds to execute. The middle bar shows that there were
about 2900 commands executed which took 1 microsecond to execute. The
third bar shows there were about 3000 commands executed which took 10
milliseconds to execute, and the fourth bar (almost not visible) indicates
maybe several hundred commands which took 100 milliseconds to execute. In
this example, this is a good array, and these are values like you would find on
good arrays – big bars on the left, little or no bars on the right.
97 Section 3 Management