Rorke Data Galaxy Aurora Series Configuration And System Integration Manual page 32

G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
times – please be patient. When the installation is complete, the terminal
window will look something like the following:
The question it is asking is applicable only to IPoIB (IP over InfiniBand which
we are not using), so press [n][enter]. If you have a card with more than one
port, it will repeat this question for each of the ports.
The response will show the status of the Infiniband card/ports installed (The
example below is for a Mellanox Infinihost III LX single-port card).
The response will show the status of the Infiniband card/ports installed (The
example below is for a Mellanox Infinihost III LX single-port card).
31 Section 2 Basic Setup