Rorke Data Galaxy Aurora Series Configuration And System Integration Manual page 97

G A L A X Y ® A U R O U R A C O N F I G U R A T I O N A N D S Y S T E M I N T E G R A T I O N G U I D E
There are 6 sets of graphs in each set. The upper right of each shows
information pertaining to the current minute. The upper left shows the previous
minute. The middle right shows the current hour, the middle left shows the last
hour. The lower right shows the current day, and lower left shows the last day.
On each set of charts, read information is in green color, and write information
is in red.
The first group of charts is for data rates. Vertically, the rate is hown in
megabytes per second. If you examine the example, the array spent
approximately 57 seconds of the last minute, doing a data rate test which
yielded a result of about 410 megabytes/second. This test proceeded through
the next 55 seconds or so into the current minute. If you look at the middle-
right chart, you can see that the test took roughly 2 minutes to perform.
96 Section 3 Management