Error Message List - Brother P-touch 7500 User Manual

Problem
Label files saved
previously are now empty.

Error Message List

Error Message
1 BLOCK LIMIT!
CHECK # OF
DIGITS ENTERED!
50 LINE LIMIT
REACHED!
7 LINE LIMIT!
76
Cause
Have the batteries and AC adapter
been disconnected?
Is there enough power remaining in
the batteries?
Have you used the Reset function?
Cause
• This message appears if you
try to use the Numbering
function when multiple
blocks of text have been
entered with the PANEL1
Label Type mode selected.
• This message appears if less
than the minimum one digit
are entered as the bar code
data.
• This message appears if the
required number of digits are
not entered in the bar code
data.
• This message appears if 50
lines have already been
entered when you press
g n
, then
• This message appears if 7
lines have already been
entered in a text block when
n
you press
• This message appears if you
delete , causing the
number of lines in a block to
exceed the 7-line limit.
All files stored in the internal
memory are lost if the batteries and
AC adapter are disconnected for
longer than two minutes.
All data stored in the internal
memory is lost if the batteries
become empty or the AC adapter is
disconnected.
The resetting function clears all
data stored in the internal memory,
including label files.
• Cancel the Numbering
function.
• Limit the number of text
blocks to 1.
• Enter a minimum of one
digit before pressing
n
• Input the correct number of
digits or change the bar code
protocol.
• Limit the number of lines to
50.
.
• Limit the number of lines in
a text block to 7.
.
• Adjust the number of lines
so that the block will not
have more than 7 lines.
Solution
Solution
.