Adding A User-Defined Character Image To The Text; Using Template Data - Brother P-touch 7500 User Manual

6
Click [OK].
The data in the folder selected in the folder
view is transferred to the P-touch.
☞ If you have selected specific data in the list
view, only that selected data is transferred
to the P-touch.

Adding a user-defined character image to the text

If a user-defined character image (a bitmap character not usually available on the
P-touch) is assigned to a PF key, that character can be added to any label that you create
on the P-touch.
Press g, then the applicable PF key.
●
The character is added to the text at the
cursor's position.
☞ Only a monochrome bitmap (*.bmp) file can be transferred to the P-touch.
☞ A high-resolution file can be cut from a file with the specifications described above.
☞ The downloaded image is automatically resized to the width of the tape being used.

Using template data

A label layout created with P-touch Editor (*.lbx file) can be transferred to the P-touch,
where it can be used as a template for printing labels. Templates can be printed using
text from either a database, or by directly typing text in.
When a database (*.mdb file created with P-touch Editor 5.0 or *.csv file) is transferred
to the P-touch, data from selected records can be added to labels either using a template
linked to the database or using a new template. In addition, the database data can be
searched to find specific records.
☞ The P-touch can only contain one database at a time. However, the database can be
replaced or updated.
66
R
1: ABC IMPORT/EX
---- -- 1 NORMAL 1