Brother P-touch 7500 User Manual page 28

●
BLOCK:
LENGTH:
MULTIPLE:
●
FRAME:
●
PRINT:
●
ROTATE:
☞ The number of blocks can be specified or changed only with the BLOCK parameter.
Text blocks cannot be added or deleted in any other way.
☞ If the number of blocks specified in the PANEL2 Label Type mode is less than the
number of text blocks that have already been entered, entered text blocks are deleted.
If the specified number of blocks is greater than the number of entered text blocks,
text blocks are added.
☞ For these types of labels, we recommend using Strong Adhesive Tape.
☞ By using the Numbering function with the PANEL2 Label Type mode, a single label
containing multiple blocks of ascending characters can easily be created, for example,
to label patch panels as shown above. (For details on the Numbering function, refer to
Printing multiple copies with incremental characters
18
1 to 50 blocks
Default: 1
6.0 to 200.0 mm
Default: 17.5mm
x1 to x9
Default: 1
OFF, 1 , 2
4 , 5
7 , 8
Default: OFF
IN ORDER, REVERSE
Default: IN ORDER
OFF, ON
Default: OFF
, 3
, 6 ,
, 9
on page 36.)
,