5.2
Loading paper into the Manual Feed Tray
NOTICE
Before loading, remove air from the envelope(s), and securely press along the flap fold line. Otherwise, it will
result in wrinkles or a paper jam.
1
Position so the flap part is facing up, and load an envelope as shown in the figure.
% If a cap is in the long side of an envelope (western-style envelope #2, western-style envelope #6, or
envelope DL), load the cap into the machine side.
2
Align the paper guide to the paper size.
3
Change the paper type and paper size on the Control Panel.
% To configure settings: Menu/Select - [PAPER MENU] - [PAPER SOURCE] - [MANUAL]
[Introduction]
5
5-7