Drive Unit; Other Parts; Note On Assembly - Sharp MX-CF10 Service Manual

3. Drive Unit

A. Belts
1) Open the top cover.
2) Remove the rear cover.
B. Gears
1) Open the top cover.
2) Remove the rear cover.
3) Disconnect the connector to remove the drive unit.

4. Other Parts

A. Sensors

5. Note on assembly

A. Reverse flapper solenoid adjustment
1) Rotate the solenoid lever (LVR-FM-SOL) fully clockwise.
2) Adjust the position of the bracket (BKT-FM-SOL) of the solenoid so
MX-CF10 DISASSEMBLY AND ASSEMBLY 6 - 4
that the solenoid's arm is completely retracted (that there is no
clearance in the rubber spacer, the stopper E-ring, and the main
unit of the solenoid). When adjusted, fix the bracket with screws.
LVR-FM-SOL
Solenoid
main unit
Stopper E-ring
Rubber spacer
Screw
BKT-FM-SOL