2. Paper Feed Unit
A. Horizontal Pass Roller 1 and Registration Roller
1) Open the top cover.
2) Open the mount cover.
3) Remove the front cover.
4) Remove the rear cover.
5) Remove the open/close cover fulcrum and two E-rings (F/R), and
remove the upper door section.
B. Horizontal Pass Roller 2 and Timing Roller
1) Open the top cover.
2) Remove the front cover and rear cover.
3) Disconnect the connector to remove the operating unit.
4) Disconnect the connector, tray support and tray spring guide spin-
MX-CF10 DISASSEMBLY AND ASSEMBLY 6 - 2
A: Horizontal pass roller 1
B: Registration roller
dle to remove the tray unit.
B
A