All Channel Mode And Select Channel Mode; Select Channel Setting - Icom IC-F4SR Instruction Manual

All channel mode and select
channel mode
The transceiver has 2 indication modes—all channel mode
and select channel mode.
Select channel mode provides easy, fast channel selection
and speeds up the scan interval. Non select channels are not
displayed while in select channel mode.
Push [ f (A/S)] to toggle all channel mode or select channel
mode.
• "X" appears when the select channel mode is selected.
Appears during select mode
MR
momentarily
A/S

Select channel setting

Setting a channel as the select channel provides easy, fast
channel selection and speeds up the scan interval.
q Push [
f (A/S)] to select all channel mode.
• "X" disappears.
w Select the desired channel with the [Y]/[Z] switches.
e Push [
f (A/S)] for 2 sec. to toggle the channel between se-
lect channel and non-select channel.
• "SKIP" disappears for a select channel.
for 2 sec.
SKIP
Appears for
non-select channels
BASIC OPERATION
A/S
3
7