Installing The Storage Subsystem In The Rack; Installing In The Rack - Cisco C880 M4 Operating Manual

8.3. Installing the Storage Subsystem in the Rack

CAUTION!
Please observe the safety precautions and references to mounting into the rack in
●
"
Important Notes
At least two people are needed to position the server in the rack.
●
The rack can tip over if more than one unit is removed.
●
8.3.1.

Installing in the Rack

The descriptions and figures in this section refer to the current support system. For other support
systems you will find the appropriate description in the packaging of the rack mounting kit.
For installation in the Rack, the rack mounting kit delivered with the subsystem is used.
1
Figure 21: Rack mounting kit
1 Sliding rail front right
2 Sliding rail front left
3 Screws and cage nuts
4 Mounting instruction
32
" on page
7.
2
Operating Manual
8.3Installing the Storage Subsystem in the Rack
4
3
chapter