Installing The Disk Drives - Cisco NSS324 Quick Start Manual

Installing the Disk Drives

4
When storing unused disk drives, do not stack multiple disk
C
AUTION
drives because this can cause drive failures.
When installing the disk drives, follow the suggestions in
Electrostatic Discharge and Grounding Best Practices
product CD. Follow these steps to install disk drives in the NSS324 or
NSS326 NAS chassis.
Remove the contents of the NAS package from the box.
S 1
TEP
Place the chassis upright on a flat surface.
S 2
TEP
From disk bay 1, remove the disk tray.
S 3
TEP
To remove the disk tray, push the silver tab down to unlock the tray,
and push the lower tab to release the tray lever. Using the tray
lever, pull the tray out.
Smart Storage
NSS 326
If your device has the disk drives already installed, continue to
N
OTE
the next section,
Cisco Small Business NSS324 and NSS326 Smart Storage
STATUS LAN USB eSATA
Connecting the Equipment, page
Cisco
, located on the
ENTER
SELECT
ENTER
11.
7