Fault Clearing - Cisco C880 M4 Operating Manual

9.Fault Clearing

9. Fault Clearing
CAUTION!
Please note the safety instructions in
If a fault occurs, attempt to rectify it in accordance with the measures set out below:
Which are described in this chapter,
●
Which are described in the documentation for the connected server and the RAID controller or HBA
●
used.
If you cannot rectify the fault, proceed as follows:
Note the steps that you have performed and the state which was active when
the error occurred. Note also any error message which may have been displayed.
Switch OFF the connected server.
Pull out the power plugs of your storage subsystem.
Contact our service organization.
chapter "
Important Notes
" on page
7.
37