Ce Certificate; Rfi Suppression; Notes On Mounting The Rack; Notes On Transportation - Cisco C880 M4 Operating Manual

Hide thumbs Also See for C880 M4:

Table of Contents

2.3. CE Certificate

The shipped version of this device complies with the requirements of the EEC directives

89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage directive". The

device therefore qualifies for the CE certificate (CE=Communauté Européenne).

All other equipment which is connected to this product must also have radio noise suppression in

accordance with EC Guideline 89/336/EWG.

Products which meet this requirement are accompanied by a certificate to that effect issued by the

manufacturer and/or bear the CE mark. Products which do not meet this requirement may be operated

only with the special permission of the BZT (Bundesamt für Zulassungen in der Telekommunikation).

This is a "Class A" equipment. This equipment may cause harmful interference in residential areas.

In this case, the user may be held liable for taking appropriate measures and bearing the costs

resulting from these measures.

● It is recommended that at least two people install the rack-mounted model because of its weight

and size.

● Ensure that the anti-tilt bracket is correctly mounted when you set up the rack.

● For safety reasons, no more than one unit may be withdrawn from the rack at any one time during

installation and maintenance work.

● If more than one unit is withdrawn from the rack at any one time, there is a danger that the rack will

tilt forward.

Transport the storage subsystem in its original packaging or in other suitable packaging which will

protect it against shock or impact.

Do not unpack it until all transport maneuvers are completed.

If you need to lift or transport the storage subsystem, ask someone to help you.

Operating Manual

2.3CE Certificate

Table of Contents