Attributes Of 100 Mbps Sfp Ports - H3C S3600-28PSI System Description

System Description
H3C S3600 Series Ethernet Switches
LED
10/100/100
0Base-T
fabric port
status LED

2.5.3 Attributes of 100 Mbps SFP Ports

The S3600-28F-EI has 24 x 100 Mbps SFP optical ports which are numbered from 1 to
24. SFP modules allow for great flexibility in networking because they are hot
swappable and user configurable.
The following table lists the available SFP modules.
Mark and
Position
Speed
Duplex
PoE
2-24
Chapter 2 Hardware Description
Color
The port is connected, and the
ON device is in an IRF loop chain
fabric.
Green
Data is being
Flash
received/transmitted on the port
The port is connected, and the
ON device is in an IRF loop chain
fabric.
Yellow
Data is being
Flash
received/transmitted on the port
Flashing green (3
Fabricing fault occurs.
Hz)
Flashing yellow
The port fails POST.
(3 Hz)
OFF The port is not connected.
The port is operating in full
ON
duplex mode
Green
Data is being
Flash
received/transmitted on the port
Yellow ––
Flashing yellow
The port fails POST.
(3 Hz)
OFF The port is not connected.
No data is being
OFF
received/transmitted
Flashing yellow
The port fails POST.
(3 Hz)
Indicates