Closing the case
Replacing the front bezel
To replace the front bezel:
1
2
3
Replacing the side panel
To replace the side panel:
1
2
3
4
www.gateway.com
Insert the tabs on the left side of the bezel into the slots in the left side of the computer.
Swing the right side of the bezel in to insert the tabs on the right side of the bezel into
the slots on the right side of the computer.
Press the right side of the bezel firmly until it snaps into place.
Make sure that all of the internal cables are arranged inside the case so they will not be
pinched when you close the case.
Insert the panel tabs into the front of the case, then swing the side panel toward the back
of the computer to secure it into place.
Replace the side panel thumbscrews.
Reconnect the cables and power cord.
123