Networks; Passwords; Power; Printer - Gateway 6-Bay mBTX PRO User Manual

The mouse works erratically
•
•

Networks

You cannot connect to your company network
Every network is unique. Contact your company computer department or network administrator
for help. For more information about setting up a network in your home, see
Computer" on page
click Help and Support. Type the phrase network troubleshooting in the
Search Help box, then click E

Passwords

Your computer does not accept your password
•

Power

Your computer will not turn on
•
•
•

Printer

The printer will not turn on
•
•
The printer is on but will not print
•
•
•
•
www.gateway.com
If the mouse pointer begins moving erratically across the computer display or becomes
difficult to control precisely, cleaning the mouse will likely improve its accuracy.
Clean the mouse by wiping the bottom with a clean, damp cloth. Make sure that the optical
sensor is clean and free of debris.
81.
Help
For more information about network troubleshooting, click Start, then
.
NTER
Make sure that C
APS LOCK
Make sure that the power cord is connected to an AC power source and to your computer,
and that your computer is turned on.
If your computer is plugged into a surge protector, make sure that the surge protector is
connected securely to an electrical outlet, turned on, and working correctly. To test the
outlet, plug a working device, such as a lamp, into the outlet and turn it on.
Make sure that the power cord is free from cuts or damage. Replace any damaged cables.
Make sure that the printer is online. Many printers have an online/offline button that you
may need to press.
Make sure that the power cable is plugged into an AC power source.
Check the cable between the printer and your computer. Make sure that it is connected
to the correct port.
Make sure that the printer is online. Many printers have an online/offline button that you
may need to press so the printer can start printing. Press the button to put the printer
online.
Check the cable for bent or broken pins.
If the printer you want to print to is not the default printer, make sure that you have
selected it in the printer setup.
To set a default printer:
1
Click (Start), then click Control Panel. The Control Panel window opens.
2
Click Hardware and Sound, then click the Change Default Printer option under the
Printers category. The Printer window opens.
is turned off, then retype the password.
"Networking Your
155