SPL is dependent on the amount of distortion introduced by them. Because this distortion is very low in the Linn 328A, you can be led into believing the SPL is lower than it actually is and hence risk exposure to damaging levels.
3-K DRIVER ARRAY TECHNOLOGY An innovative positioning technique is used on the 328A whereby the midrange, tweeter and super-tweeter drivers are mounted on the 3-K driver array (patent applied for) in front of an acoustically-shaped reflection cavity extending below the baffle plane.
The illustration below shows the location of the centre of gravity (C of G) of the monitor to help you position the 328A safely. The C of G should fall as close to the centre of the platform as possible.
3-K Driver Array 328A SPRS You can place an order with Linn via: orders@linn.co.uk Or, if you need more information (on pack contents, pricing, etc.), you can contact the Linn Helpdesk via: helpline@linn.co.uk or by telephone on: +44 (0)141 307 7777 CLEANING Disconnect the 328A from the power supply before cleaning.
3-K driver array MF: 250 W HF: 125 W SHF: 125 W Power Standby 62 W Typical 115 W Peak 3000 W Speaker Sensitivity Treble Shelf Bass Roll-on On/Off balanced Drive units Midrange Tweeter Super-tweeter Cabinet construction Input connector Power On indicator...