Page 2
Year 2000 Compliant in such circumstances. Except to the extent implied by law and which by law cannot be excluded, Linn shall not be liable to any party for any costs, claims, losses (including indirect and consequential losses) or liabilities arising from the failure of Linn’s software to be Year 2000 Compliant if used in...
IMPORTANT SAFETY INFORMATION Explanation of symbols used in this manual and on the product : This symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure of sufficient magnitude to cause electric shock. This symbol is intended to alert the user to the presence of important maintenance and servicing information in the instruction and service manuals.
Page 4
In addition to any statutory rights the customer may have we undertake to replace any parts which have failed due to faulty manufacture. To help us please ask your Linn retailer about the Linn warranty scheme in operation in your country.
Page 5
The addition of any Linn component will improve the sound quality of your system. Linn has a policy of continuously improving its equipment allowing customers to retro-fit most product upgrades.
Page 6
NTRODUCTION Thank you for choosing our Linn KEILIDH LS300 loudspeakers, which join the family of Linn loudspeakers, and use much of the technology of the KABER and the KELTIK. Ceilidh (pronounced Kay-Lee) is the traditional Gaelic word for a social gathering, and has become...
GRILLES The KEILIDH grille is unusual in that it has no frame and fits directly onto the front baffle. This avoids the problems of rattling and diffraction which a frame can introduce.
"bright". To compensate for such an environment, or for source equipment that may be similarly "bright", an ad- justment can be made to the KEILIDH to reduce the amount of treble slightly. Your Linn retailer will carry out this modification if required.
CONFIGURATION The Linn KEILIDHs are an extremely versatile loudspeaker, and can be used in a particularly wide range of configurations, each with a distinct performance advantage. This makes it easy for you to develop your system over its lifetime, without having to change any substantial component.
Page 10
KEILIDH AKTIV crossover allows better filtering and more accurate amplitude and time response correction for the loudspeaker than is possible with a passive crossover. If you use the Linn power amplifiers, the AKTIV circuitry can be added inside the power amplifiers, giving substantial sound performance advantages.
NSTALLATION GUIDE Lift the cabinets from the carton by their sides to avoid damaging the drive units. If you can, keep the packing for possible future transportation. INTEGRAL BASE If you are using the KEILIDHS with the standard base, you will need to install the spikes.
CONNECTION Connection of the loudspeaker to the amplifier should be made with good quality cable. Linn K400 series cable is ideal for bi-wiring. The leads should be terminated with the connectors supplied. These ensure optimum contact and the use of other connectors could degrade the signal.
Refer to the pictures overleaf for the correct arrangement of linking plates for the passive configurations. The AKTIV configurations are complex and are therefore always installed by a Linn retailer. IMPORTANT Don't remove all the collars at once. Note that the lowest pair of sockets is only used in AKTIV mode.
SINGLE WIRING Install a linking plate between the top two negative sockets, and between the top two positive sockets. Leave the bottom two sockets unused. BI-WIRING Remove both linking plates. Leave the bottom two sockets unused. BI-AMPING The exact method of wiring your system in this configuration depends on the pre-amplifier and amplifiers you are using.
The distance between the speakers should be no more than the distance from the listening position to either loudspeaker. KEILIDH speakers have been designed to perform best when placed close to a wall. Ideally the rear of the loudspeaker should between 4" and 12" (10 cm and 30 cm) from the wall, and at least 18"...
50Hz - 20kHz +/-2dB, 1m on axis. Input impedance 4 Ohms nominal Amplifier requirements At least 60W per channel into 4 Ohms. For example, Linn LK140. Features Internal adjustment of treble level. Wiring options Single-wiring, Bi-Wiring, Bi-amplification, Active Bi-Amplification, Active Tri-Amplification.
WARNING Refer all enquiries to authorised dealers only. Unauthorised servicing or dismantling of the product invalidates the manufacturer's warranty. If you are in any doubt, please contact your nearest Linn dealer. For information on your nearest dealer, contact the Linn factory in Scotland or your national distributor.
Need help?
Do you have a question about the KEILIDH and is the answer not in the manual?
Questions and answers