Care And Maintenance; Main Unit; Filters - Sharp FU-888SV Operation Manual

CARE AND MAINTENANCE

(To maintain the best performance of this product, please clean the unit periodically.)
When cleaning, be sure to remove the power plug from the wall outlet. In addition, never
handle the power plug with wet hands.
Electrical shock and injury may occur as a result.

MAIN UNIT

Clean off the dirt on the main unit and the
installing surface as frequent as possible.
Stubborn dirt may be difficult to remove.
Wipe dry with a soft cloth
For stubborn dirt, wipe with a soft cloth damp-
ened with water or warm water of 40°C or less.
Do not use volatile chemicals
Benzene, paint thinner, polishing powder, etc.,
may damage the unit surface.
Do not use detergents
Detergents may damage the unit surface.
Do not splash water
Never apply water on the unit.
ODOR SENSOR
DUST SENSOR
The sensitivity of the sensors will become
unstable if the odor or dust sensor is dirty or
blocked.
Remove dust on the surfaces of the sensor
openings using a vacuum cleaner.
Odor sensor Dust sensor
E-12

FILTERS

Clean using the nozzle of a vacuum
cleaner without removing the pre-filter.
NOTE
Never wash or clean the HEPA filter or
stamina-power carbon using the nozzle
of a vacuum cleaner directly. This will
greatly decrease the performance of the
filters.