Supero SUPERSERVER 1027R-WC1R User Manual page 98

S S
UPER ERVER 1027R-WC1R/1027R-WC1RT User's Manual
Select Enabled to support legacy USB devices. Select Auto to disable legacy sup-
port if USB devices are not present. Select Disable to have USB devices available
for EFI (Extensive Firmware Interface) applications only. The settings are Disabled,
Enabled and Auto.
Port 60/64 Emulation
Select Enabled to enable I/O port 60h/64h emulation support for the legacy USB
keyboard so that it can be fully supported by an operating system that does not
recognize a USB device. The options are Disabled and Enabled.
EHCI Hand-Off
This item is for operating systems that do not support Enhanced Host Controller
Interface (EHCI) hand-off. If this item is set to Enabled, EHCI ownership change will
be claimed by the EHCI driver. The options are Disabled and Enabled.
SATA Confi guration
When this submenu is selected, the AMI BIOS automatically detects the presence
of IDE or SATA devices and displays the following items.
SATA Port0~SATA Port5: The AMI BIOS displays the status of each SATA port
as detected by the BIOS.
SATA Mode
Use this feature to confi gure SATA mode for a selected SATA port. The options are
Disabled, IDE Mode, AHCI Mode and RAID Mode. The following are displayed
depending on your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
SATA (Serial-ATA) Controller 0/SATA (Serial-ATA) Controller 1
Use this feature to activate/deactivate and to set the SATA mode for SATA
Controller 0 or SATA Controller 1. The options for Controller 0 are Disabled,
Enhanced and Compatible. The Options for Controller 1 are Disabled and
Enhanced.
AHCI Mode
The following items are displayed when the AHCI Mode is selected.
Aggressive Link Power Management
Select Enabled to enable Aggressive Link Power Management support for
Cougar Point B0 stepping and beyond. The options are Enabled and Disabled.
7-14