Supero SUPERSERVER 1027R-WC1R User Manual page 101

Chapter 7: BIOS
COM Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This feature indicates whether or not a reset is required for the serial port speci-
fi ed by the user.
Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. The options for Serial Port 1 are: Auto, IO=3F8h;
IRQ=4; IO=3F8h; IRQ=3; IO=2F8h; IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12.
Device Mode
Use this item to set the device mode for the serial port. The options are Normal
and High Speed.
SOL (Serial-Over-LAN) Confi guration
SOL Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 2.
SOL Change Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. The options for Serial Port 2 are: Auto, IO=2F8h;
IRQ=3; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=2F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; and IO=2E8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12.
SOL Device Mode
Use this item to set the device mode for the serial port. The options are Normal
and High Speed.
7-17