Rack Mounting Instructions; Identifying The Sections Of The Rack Rails - Supero SUPERSERVER 1027R-WC1R User Manual

S S
UPER ERVER 1027R-WC1R/1027R-WC1RT User's Manual
2-5

Rack Mounting Instructions

This section provides information on installing the SC116 chassis into a rack unit with
the rails provided. There are a variety of rack units on the market, which may mean
the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
NOTE: This rail will fi t a rack between 26" and 33.5" deep.

Identifying the Sections of the Rack Rails

The chassis package includes two rack rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly to
the server chassis and an outer fi xed rack rail that secures directly to the rack itself.
Figure 2-1. Identifying the Sections of the Rack Rails
Inner Rails
(Inner rails are pre-installed
on the chassis)
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
2-4
Inner Rail
Extensions