Technical Information; Specifications - Elektron Analog Rytm Getting Started Manual

TECHNICAL INFORMATION

SPECIFICATIONS

THE SEQUENCER
12 drum tracks
1 FX track
Up to 64 steps per pattern
Individual track lengths
128 user samples (per project)
12 Scenes (per kit)
Trig mute, accent, swing and slide functions
Micro timing
Parameter locks
Chromatic mode
Scene mode
Performance mode
Versatile and assignable Retrig
Live friendly Performance mode
Sound-per-step change
Instant kit, pattern and Sound reload
Full real-time control
DRUM VOICE × 8
Fully analog signal path
1 × analog percussion sound generator
1 × analog overdrive circuit
1 × 2-pole analog multi-mode filter
1 × stereo VCA
1 × filter envelope
1 × amp envelope
2 × effect sends
1 × assignable LFO
1 × dedicated LFO fade envelope
1 × 16-bit sample playback engine
1 × sample bitrate reduction
SEND EFFECTS
Delay
Reverb
MASTER EFFECTS
Analog Stereo Distortion
Analog Stereo Compressor
STORAGE
128 projects (+Drive)
128 Kits (per project)
128 patterns (per project)
16 Songs (per project)
4096 sounds (+Drive Sound library)
128 Sounds (per project)
1GB sample storage (+Drive)
64 mb sample storage (per project)
128 user samples (per project)
IMPEDANCE BALANCED AUDIO OUTPUTS
Main outputs level: +15dBu
Output impedance: 440 Ω unbalanced
UNBALANCED AUDIO INPUTS
Input level: +15dBu maximum
Audio input impedance: 9 k Ω
HEADPHONES OUTPUT
Headphones out level: +15dBu
Output impedance: 55 Ω
INDIVIDUAL VOICE OUTPUTS
Output level: +15 dBu
Output Impedance: 440 Ω
ELECTRICAL SPECIFICATIONS
Unit power consumption: 14 W typical, 20 W maximum.
Recommended power supply: PSU-3 or similar 12V DC, 2A
HARDWARE
12 synthetic rubber, pressure sensitive and backlit pads
122 × 32 pixel backlit LCD screen
MIDI In/Out/Thru with DIN Sync out
2 × ¼" impedance balanced audio out jacks
1 × ¼" stereo audio in jack
1 × ¼" stereo headphone jack
4 × ¼" (TRS) paired individual track output jacks
48 kHz, 24-bit D/A and A/D converters
Flash-EEPROM upgradable operating system
Electrically isolated multi-functional USB 2.0 port
PHYSICAL SPECIFICATIONS
Sturdy steel casing
Dimensions: W340 × D176 × H63 mm (13.4" × 6.9" × 2.5")
(including, power switch, knobs and rubber feet)
Weight: approximately 2.4 kg (5.3 lbs)
21