Loading A Kit; Saving A Kit - Elektron Analog Rytm Getting Started Manual

LOADING A KIT

1 Open the KIT menu by pressing [FUNCTION] + [FX].
2 Use the [ARROW] keys [UP] and [DOWN] or the LEVEL knob to select LOAD KIT. Press [YES/SAVE] to open the menu.
3 The LOAD KIT menu contains up to 128 saved kits. The current active kit is shown with inverted graphics. Select the kit to be
loaded using the [ARROW] keys or the LEVEL knob.
4 Once a kit has been selected, press [YES/SAVE] to load it. The active pattern will now be linked to the loaded kit.

SAVING A KIT

1 Open the KIT menu by pressing [FUNCTION] + [FX].
2 Use the [ARROW] keys [UP] and [DOWN] or the LEVEL knob to select SAVE KIT. Press [YES/SAVE].
3 Select the position to which the kit should be saved by using the [ARROW] keys or the LEVEL knob.
4 Once a position has been selected, press [YES/SAVE] to save the kit. The naming screen will appear. Read more
about naming on page 16. Quickly save changes to an active kit by pressing [YES/SAVE] + [FX].
LOADING A SOUND TO A DRUM TRACK
1 Select the drum track to which the Sound will be loaded to by pressing [TRACK] + [PADS] 1-12.
2 Open the SOUND menu by pressing [FUNCTION] + [MUTE].
3 Use the [UP] and [DOWN] arrow keys to select SOUND BROWSER. Press [YES/SAVE] to open the menu. The SOUND
BROWSER shows a list of all Sounds in either the +Drive Sound library or the Sound pool. Only the Sounds that can
be voiced by the active track will be shown. Scroll the list by turning the LEVEL knob or by pressing [ARROW] keys
[UP] or [DOWN].
13