Elektron Analog Rytm Getting Started Manual page 2

1. Do not use the unit near water.
2. Never use aggressive cleaners on the casing or on the LCD screen. Remove dust,
dirt and fingerprints with a soft, dry and non-abrasive cloth. More persistent
dirt can be removed with a slightly damp cloth using only water. Disconnect
all cables while doing this. Only reconnect them when the product is safely dry.
3. To avoid scratches or damage, never use sharp objects near the casing or the
LCD screen. Avoid applying any pressure to the screen itself.
4. Install in accordance with the manufacturer's instructions. Make sure you place
the unit on a stable surface before use. If you mount the unit in a rack, be sure to
tighten all four screws in the rack mount holes.
5. Connect the unit to an easily accessible electrical outlet close to the unit.
6. In the EU, only use CE approved power cords.
7. When transporting the unit, preferably use accessories recommended by the
manufacturer or the box and padding the unit originally shipped with.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
any other appliance (including amplifiers) emitting heat.
WARNING
To reduce the risk of fire, electrical shock or product damage:
•
Do not expose the unit to rain, moisture, dripping or splashing and also avoid placing objects filled with liquid, such as vases, on the unit.
•
Do not expose the unit to direct sunlight, nor use it in ambient temperatures exceeding 30° C as this can lead to malfunction..
•
Do not open the casing. There are no user repairable or adjustable parts inside. Leave service and repairs to trained service technicians only.
SAFETY INSTRUCTIONS FOR THE POWER ADAPTER ELEKTRON PSU-3
•
The adapter is not safety grounded and may only be used indoors.
•
To ensure good ventilation for the adapter, do not place it in tight spaces. To prevent risk of electric shock and fire because of overheating, ensure that curtains and other
objects do not prevent adapter ventilation.
•
Do not expose the power adapter to direct sunlight, nor use it in ambient temperatures exceeding 40° C.
•
Connect the adapter to an easily accessible electrical outlet close to the unit.
•
The adapter is in standby mode when the power cord is connected. The primary circuit is always active as long as the cord is connected to the power outlet. Pull out the
power cord to completely disconnect the adapter.
Elektron machines are sold with a three year limited warranty, starting from the date of the original purchase. Being able to prove the date of the original purchase with an
invoice or a receipt is necessary if you require warranty service. If the machine should need a repair during the warranty period no charges will be applied for parts or labor. This
warranty is transferable to other owners should the Elektron machine be resold during the warranty period. Items belonging to the Elektron Style range of products (t-shirts,
stickers, posters etc.) are not covered by this warranty.
This warranty does not cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to follow
instructions according to either the Getting Started manual or the full user manual for this product; any shipment of the product (claims must be presented to the carrier); re-
pair or attempted repair by anyone other than Elektron or a certified Elektron repair center (b) any unit which has been altered or on which the serial number has been defaced,
modified or removed; (c) normal wear and any periodic maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in
temperature or humidity; (e) damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; or (f) RFI/EMI (interference/noise)
caused by improper grounding or the improper use of either certified or uncertified equipment, if applicable.
Warranty service procedure for machines bought from a retailer
Please contact their support if you need warranty service. You will then be guided how to proceed with your errand. Note that the Elektron three year limited warranty is in
addition to any warranty your retailer may offer.
Warranty service procedure for machines bought from the Elektron Online Shop
Contact the Elektron Support at www.elektron.se if you need warranty service. You cannot send a unit to a certified Elektron repair center unless agreed to by
Elektron. The customer is responsible for shipping charges if the machine needs to be shipped to a certified Elektron repair center for warranty service. Elektron
covers the shipping back to the customer during the warranty period. Should the unit be dead on arrival, or if the hardware malfunctions within 2 weeks of the
original purchase date, Elektron will cover the shipping to a certified Elektron repair center.
IMPORTANT SAFETY AND MAINTENANCE INSTRUCTIONS
Read these instructions and follow them.
9. Do not put the PL-2 Protective Cover (Elektron accessory) on the unit while the
unit is powered on.
10. Do not block the ventilation holes located on the side and the bottom of the
enclosure of the unit.
11. This product, either alone or in combination with an amplifier and headphones
or speakers, may be capable of producing sound levels that can cause perma-
nent hearing loss. Do not operate for a long period of time at a high volume level
or at a level that is uncomfortable.
12. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the unit.
13. Use attachments/accessories specified by the manufacturer.
14. Unplug this unit during lightning storms or when it is not used for long periods
of time.
15. Refer all servicing to qualified service technicians. Servicing is required when
the unit has been damaged in any way, liquid has been spilled or objects have
fallen into the unit, the unit has been exposed to rain or moisture, does not oper-
ate normally, or has been dropped.