Dmx Control; Dmx Traits - ADJ VIZI BEAM 5 RX User Instructions

Vizi Beam 5RX
2. The lamp running time will now be displayed. Press MENU to
exit.
3. To clear the lamp running time, when lamp running time is
displayed press the ENTER button. Either "NO" or "CLea" will
be displayed.
4. Use the UP or DOWN buttons to select "CLea" and press
ENTER. The lamp running time will now be cleared. You should
clear the lamp running time everytime you change the
lamp.
LAMP -
With this function you can turn the lamp on/off
while the unit is still powered on.
1. Press the MENU button until "LAMP" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the lamp on at all times,
or "OFF" to turn the lamp off while the unit is still powered on.
3. Press ENTER to confirm.
LPND -
With this function you can turn the lamp on or
off while the power is on.
1. Press the MENU button until "LPND" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the lamp on at all times,
or "OFF" to turn the lamp off while the unit is still powered on.
3. Press ENTER to confirm.
VER
- Use this function to display the Software version of
the unit.
1. Press the either the MENU button until "VER" is displayed,
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX Instruction Manual Page 16
System Menu Vizi Beam 5RX
press ENTER.
2. The display will show the software version.
DEF
tings.
1. Press the either the MENU button until "deF" is displayed,
press ENTER.
2. The display will show the software version.
RSET
1. Press the MENU button until "RSET" is displayed, press
ENTER.
2. The fixture will now reset.
Vizi Beam 5RX
Universal DMX Control:
sal DMX-512 controller. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Vizi Beam 5RX has 2 DMX channel modes, 16 channel mode
and 19 channel mode. See pages 21-34 for detailed description
of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 10-12 as well as the set-up specifications that are
included with your DMX controller.
3. Follow the instructions on page 14 to select your desired DMX
channel mode and to set the DMX address.
4. Use the controller's faders to control the various DMX fixture traits.
5. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
6. For help operating in DMX mode consult the manual included
with your DMX controller.
- Use this function to revert back to the default set-
- Use this function to reset the unit.
This function allows you to use a univer-
ADJ Products, LLC - www.adj.com - Vizi Beam 5RX Instruction Manual Page 17
System Menu

DMX Control