Advertisement
4
ASSEMBLY
WARNING
During the assembly process there are several areas that special attention must be paid. It is very important to follow the assembly
instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the weight
bench could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-
to-side play in the frame uprights. If there is any play in these areas, the weight bench has not been properly assembled. To prevent
damage to the weight bench, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your weight bench's serial number located on the rear stabilizer
tube and
enter it in the space provided below. Also locate the model name which is next to the serial
number.
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
SERIAL NUMBER:
HORIzON
MODEL NAME:
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
SERIAL NUMBER LOCATION
5
Advertisement
