Configure Your Hotspot's Access Point Name - NETGEAR 779S User Manual

3. Enter the password in the Sign In field.
The default password is attadmin. The password is case-sensitive.
4. Select Settings > ROUTER > Basic.
5. Specify your hotspot's LAN settings.
If the DHCP server is enabled, it automatically assigns an IP address to each device on
the network and manages its configuration information.
The DNS mode setting specifies how the DNS servers are obtained. If you select the
Auto radio button, the servers use the DNS relay specified by the Internet provider.
The Submit button displays after you make a selection.
6. Click the Submit button.
Your changes are saved.

Configure Your Hotspot's Access Point Name

The hotspot auto configures for most mobile service providers in Europe and southeast Asia.
However, some of the smaller operators require additional configuration:
• If your mobile broadband service is working, you do not need to change or set up your
access point name (APN).
AirCard 779S Mobile Hotspot
Advanced Settings
50