Install The Micro-Sim Card - NETGEAR 779S User Manual

Aircard mobile hotspot
Hide thumbs Also See for 779S:
Table of Contents

Advertisement

Make sure that you get a data-enabled SIM:
Some phone SIMs work, but not all. Best practice is to use a hotspot or tablet SIM.
Phone SIMs and hotspot and tablet SIMs look the same but work differently on the
network.
If you want to use 4G LTE data, make sure that the service provides 4G capability.
Get the APN from the service provider:
The APN is often listed in the literature that came with the SIM.
The service provider website might also list the APN information.
As a last resort, most service provider APN information is available through a web
search. For example, search for <service provider name> APN.
For information about adding, selecting, or removing APNs, see
Hotspot's Access Point Name

Install the Micro-SIM Card

To connect to the Internet, you need a micro-SIM card. To obtain a micro-SIM card, contact
your Internet service provider.
To install the micro-SIM card:
1.
Remove the back cover by lifting at the notch on either corner of the hotspot.
2.
Insert the micro-SIM card.
AirCard 779S Mobile Hotspot
on page 50.
Get Started
10
Configure Your

Advertisement

Table of Contents
loading

Table of Contents