Monitor Data Usage; Manage Wi-Fi - NETGEAR 779S User Manual

Monitor Data Usage

You can monitor or configure your data usage using the hotspot web page.
To configure your monthly data usage:

1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Enter http://attwifimanager or http://192.168.1.1.
A login screen displays.
3. Enter the password in the Sign In field.
The default password is attadmin. The password is case-sensitive.
If you are using a post-paid SIM card, select the Data Alert check box and adjust the
slide bar to set a data usage alert.
Note: If you have a GoPhone plan, go to
data usage.
Data Usage Disclaimer
Actual billed usage can be higher than estimated data usage displayed on the usage meter.
For example, actual billed usage might be higher when: a part of a shared data plan such as
Mobile Share; multiple users with different log in credentials using the same device; traveling
internationally or outside AT&Ts network; using the SIM card with another device; or, using a
tethered handset.

Manage Wi-Fi

The mobile hotspot gives you the option to share the Wi-Fi radio between two Wi-Fi
networks, a main Wi-Fi network for devices you trust, and a guest Wi-Fi network that allows
you to share your Wi-Fi with temporary visitors without exposing them to your devices on the
main Wi-Fi network.
By default, main Wi-Fi is enabled and guest Wi-Fi is disabled. If your place of business does
not allow Wi-Fi or for any other reason you want to disable Wi-Fi and use the hotspot only in
tethered mode, the hotspot gives you that option.
Note: Whenever you change Wi-Fi settings, the hotspot resets to activate
the new settings. Any devices connected to the hotspot are
disconnected when the hotspot resets.
AirCard 779S Mobile Hotspot
att.com/mygophone
Use Your Hotspot
15
to check your