Use Remote Access; Use The Router As A Wifi Access Point - NETGEAR SXS80 User Manual

Orbi Pro WiFi 6 Router Model SXR80 and Orbi Pro WiFi 6 Satellite Model SXR80
Select one of the following:
• To allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.
• To allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the
allowed range.
• To allow access from any IP address on the Internet, select the Everyone radio
button.
7. Specify the port number for accessing the router.
The default port for secure HTTP (HTTPS) access is 8443. You can enter a custom
port number for the remote router access. Choose a number from 1024 to 65535,
but do not use the number of any common service port.
8. Click the Apply button.
Your settings are saved.

Use remote access

To use remote access:
1. Launch a web browser on a computer that is not on your business network.
2. Type your router's WAN IP address into your browser's address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 134.177.0.123 and you use port number
8080, enter https://134.177.0.123:8080 in your browser.

Use the router as a WiFi access point

You can set up the Orbi Pro router to function as an access point (AP) on the same local
network as another router or gateway. When the Orbi Pro router functions as an AP, its
router features are disabled to prevent any conflict with the other router or gateway on
the network.
For example, you can use the Orbi router as a WiFi access point that connects to a
gateway or modem router that you already use for your Internet service. In this situation,
you do not need to change the settings for the gateway or modem router.
Manage and Monitor Your Orbi
Pro System
159 User Manual