Making A Call - Siemens miniTek User Manual

Pairing
Before you can use miniTek with your phone, you need
to pair them:
• Press for about 3 seconds to turn miniTek on.
• Activate the Bluetooth function in your phone.
• Press for about 5 seconds to start pairing miniTek with
your phone.
When pairing mode has been activated, all 3 buttons (on/off
button, telephone button, and audio source button) shine for 3
seconds, then the telephone button flashes.
• Search in the menu of your phone for other Bluetooth devices.
• Choose "RCU Connect" to pair miniTek and the phone.
• Enter the PIN "0000" if requested.
Note: Refer to the user guide of your connected device for more
detailed information on how to link devices via Bluetooth.
Accepting an incoming call
• Press to accept the incoming call.
• Speak into miniTek's microphone to talk.
• Press to terminate the call.
Your hearing instruments switch back to the hearing program
you used before taking the call.
Note: If paired with two phones, miniTek uses different ring
tones to distinguish incoming calls.
16
Rejecting an incoming call
• Press for about 3 seconds to reject the incoming call if
supported by the phone.

Making a call

• Dial the desired number on your phone.
• Press twice to transfer the connection from your phone
to the miniTek.
• Press twice to transfer the connection from the miniTek
back to the phone.
If your phone transfers the connection automatically, you do
not need to press .
17