Using The Tek Transmitter - Siemens miniTek User Manual

Using the Tek transmitter

The Tek transmitter (Fig.17) allows you to use your hearing
instrument(s) as a wireless headset for any external device.
Connected to the desired device, the Tek transmitter streams
the audio through the remote control and into your hearing
instrument(s).
Fig. 17: Tek transmitter
Turning the Tek transmitter on/off
• Use the On/Off switch to turn the Tek transmitter on.
The blue LED blinks, indicating that the Tek transmitter is
waiting to connect to the remote control. When the blue
LED is on constantly, the connection to the remote control is
established.
• Use the On/Off switch to turn the Tek transmitter off.
Turn the Tek transmitter off when not in use.
Sound level
The sound level button allows you to increase or decrease the
volume of the audio signal of the Tek transmitter. There are 5
volume settings.
• Press the sound level button to change the volume of the audio
signal. The blue LED blinks to indicate the volume setting.
40
1 On/Off switch
2 Sound level
3 Contact for power plug
4 2.5 mm stereo jack
5 LED
Charging the Tek transmitter
• Connect the Tek transmitter with the power plug to a power
outlet. A red LED indicates that the charging process is
ongoing. Charging time is about 5 hours depending on the
status of the rechargeable battery.
Charging is complete when the red LED goes out.
Connecting the Tek transmitter with an
external device
• Choose one of the cables provided and plug the 2.5 mm
(smaller) stereo plug into the Tek transmitter.
Depending on the device you want to connect the Tek
transmitter to, different adapters are included in the delivery
(Fig.18):
1 2 3
Fig. 18: Adapters
1. 3.5 mm stereo jack to 2.5 mm stereo plug
2. 3.5 mm stereo jack to 6.3 mm stereo plug
3. cinch (RCA) to SCART
4. 3.5 mm stereo jack to cinch (RCA)
The graphic on the following page shows how different devices
can be connected to the Tek transmitter.
• Connect the external device to the Tek transmitter according
to the diagram.
4
41