Getting Started; Set Initial Settings; Select Display Language/Cancel Demonstration - Kenwood KDC-U463 Instruction Manual

GETTING STARTED

1
Select the display language and cancel the
demonstration
When you turn on the power (or after you reset the unit), the display
shows:
• For /
"SEL LANGUAGE" "PRESS" "VOLUME KNOB"
• For / /
"CANCEL DEMO" "PRESS"
1
Turn the volume knob to select [ENG] (English) or [RUS] (Russian),
then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO"
KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
3 Turn the volume knob to select [CLOCK ADJUST], then press the
knob.
4 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the
knob.
4
/ / :
/ /
"VOLUME KNOB" : Proceed to step
"PRESS" "VOLUME
6
Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold
To return to the previous setting item, press
(Except for )
While in clock display screen...
Press and hold
4
Then, perform step
3
Set the initial settings
1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
/
For
:
/
2
.
CONTROL] directly.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4 3
Repeat step until the desired item is selected or activated.
5
Press and hold
To return to the previous setting item, press
AUDIO CONTROL
SWITCH REAR/ SUB-W or REAR/ SUBWOOFER: Selects whether rear speakers or a
PREOUT subwoofer are connected to the line out terminals on the rear (through an
external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU (For
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination remain as
[COLOR SELECT] color. ( 11)
to exit.
.
to enter clock adjustment mode directly.
to set the clock.
/
/
: Pressing AUD enters [AUDIO
/
to exit.
.
)
/ /
Default: XX